DESCRIPTION
The RN-SERIAL-PRO3V-DGL is a USB-to-Serial TTL bridge board module (PCB Assembly) designed to accommodate a quick and easy means to interconnect to devices having TTL level serial interfaces which require conversion to USB. The on-board bridge controller is the PROLIFIC 64-bit PL2303HXD USB to Serial UART device which controls the relevant USB signal and protocol requirements.
As a PCB Assembly, the RN-SERIAL-PRO3V-DGL is comprised of 2 main components, a USB type-A connector as the interface to the outside world and small form factor PCB requiring soldered-wire connections to the mating device(s). The RoHS compliant PCB assembly is configured with a fixed TTL output level of +3.3V.
FEATURES
- Enables USB-to-Serial TTL conversion/bridging
- I/O includes TX, RX, RTS, CTS, VCC, and GND
- USB 2.0 full speed compatible
- Supports 5,6,7 or 8 Data bits, 1, 1.5, or 2 Stop bits, and Parity setting of None, Even, Odd, Mark, or Space
- Parity error, Frame error, and Serial Bread Detection supported
- Data Flow controlled by RTS/CTS, DSR/DTR, or XON/XOFF
- PCB assembly powered by USB Bus
- External Logic powered from USB Port at +3V
- On-Chip USB1.1 Transceiver, 5V to 3.3V Regulator
- Operating Temperature range: -40C to +85C
