DESCRIPTION
The RN-800S-CB connects to industry standard sensors to provide wireless, remote signal monitoring and device control in industrial and commercial environments. Easily attaches to analog sensor outputs and automatically takes continuous measurements. Data is transferred wirelessly to PC and PDA clients using the Bluetooth Serial Port Profile (SPP) or it can be paired with the RN-220XP serial adapter or RN-USB-X dongle to create a wireless serial port connection. Software applications can control and acquire data as if they were connected to a local serial port. The RN-800S-CB's wireless Analog Data Transfer contains a built in processor and smart Bluetooth radio. The device is programmed over Bluetooth via simple ASCII commands. Both ASCII and binary data formats are supported. Channels can be selected as single ended or differential measurements.
FEATURES
- Small form factor: 1.6” x 3.0” x 0.9”
- Eight 16 bit input A/D channels, input voltage 0-5VDC at upto 3000Hz sampling rate
- High power Class 1 Bluetooth radio (12dBm output transmitter, 100 meter range) with integral chip antenna
- Equipped with Serial Port Profile, BlueSentry can be configured as either Master or Slave
- Two on board FET switches for powering external sensors
- Two general purpose inputs/outputs (15ma drive) for control
- Low power 6-12VDC (75ma) can run from 4 AAA batteries
- Low power sleep and wake on connect options
- Screw post (power in, 2 ch), RJ45 (power in, 6 ch) and 12 pin internal header connections
- External SMA jack Antennae option, order RN-800S-E.
APPLICATIONS
- Remote Temperature Sensor
- Wireless Motor Control
- Remote Motion Sensors
- Wireless control and monitoring
